箱式屏蔽效能测试方法及影响因素分析

为测试强电磁场作用下材料的屏蔽效能,基于屏蔽材料的屏蔽原理,提出一种在GTEM室内置屏蔽箱测试材料屏蔽效能的新方法,构建实验平台,仿真分析屏蔽箱窗口尺寸及测试探头位置对测试结果的影响．实验结果表明：测试窗口大小和测试位置对测试材料的屏蔽效能有影响．其主要影响因素是屏蔽效能的测试频率下限,并确定了0．6m×0．6m窗口的测试频率下限为55MHz,0．3m×0．3m测试窗口的测试频率下限为250MHz．     

复合陶瓷含片状夹杂共晶体的理论断裂强度

应用四相模型法研究含片状夹杂复合共晶体的细观应力场．在基体、界面相和片状夹杂为各向同性的条件下,得到细观应力分布规律,并表现出明显的尺度效应．应用位错塞积理论研究片状夹杂内的位错运动,通过两相界面处位错塞积产生的应力集中确定其在基体内产生的最大张应力,导致基体首先被破坏失效,当基体内最大张应力等于分子理论的断裂强度时,得到共晶体断裂强度的理论表达式．结果表明：含片状夹杂共晶复合陶瓷强度随夹杂厚度增加而减小．     

翼栅绕流流场数值模拟及动力性能研究

基于2D不可压缩定常流动的控制方程,对5个NACA4412非对称翼型组成的平面直列翼栅绕流流场进行了数值模拟,对比分析了同一翼型在翼栅中工作和单独绕流时的升、阻力情况,验证了翼栅装置工作的可行性,反映了翼栅绕流的客观规律性。结果表明:翼栅翼型头部流速和压力急剧变化,尾部出现流涡尾迹,前部是负压区,后部是正压区,内部流速大,压力小;在1/3弦长附近翼栅翼型表面压力出现拐点,拐点之前翼型上下表面压力差较大,拐点之后翼型上下表面压力差较小;翼栅内部流场具有相似、相近性,外部流场差异性较大;翼型的压力差是产生升力的主要原因。     

机动输油管线泄漏监测技术

机动输油管线采用露天方式快速铺设,容易发生泄漏事故。根据负压波原理,利用一种基于可变窗长中值滤波器的泄漏检测算法,在不降低检测灵敏度的前提下,能有效降低泄漏误报率。该算法在保证泄漏定位精度的同时,还能保持较高的实时性,较好地满足机动输油管线泄漏监测的需要。     

编队对潜作战中抗友邻舰干扰方法

针对编队远程水下警戒中拖曳线列阵声纳抗编队中友邻舰辐射噪声干扰问题,基于拖曳线列阵声纳的检测性能,由友邻干扰时空频特征,给出了产生干扰盲区与左右舷镜像源的原因。分析了两种抗友邻干扰"软补盲"方法的优缺点,并通过计算机仿真双舰编队在平行搜索且只有一条拖曳线列阵工作模式下,得到了未使用抗干扰和采用"软补盲"抗干扰方法后对于被动拖曳线列阵声纳检测性能产生的不同影响,并根据影响结果给出了平行搜索方式下使用"软补盲"抗干扰方法后的队形配置建议与作战指挥原则。     

窄带假设对GNSS天线阵抗干扰性能评估的影响分析

传统方法基于窄带假设条件下的模型对天线阵抗干扰性能进行评估,存在分析精度低的问题.新一代全球卫星导航信号带宽的增加使得宽带效应更为明显,影响将更为严重.因此,窄带假设所造成的影响需要重新审视.论文结合当前普遍采用的数字域加权处理方式,推导出天线阵处理频率响应的精确模型,得出阵列处理响应在频域上可表示为空域导向矢量与时间...     

基于快速傅里叶变换的扫描单发单收面阵近场成像技术

近年来,扫描单发单收面阵近场成像技术在安检、医疗等民用领域中引起了广泛关注.然而,传统的距离徙动算法在对回波进行处理的过程中无法避免多步近似和插值操作,并且忽视了信号传播衰减带来的不利影响.因此,提出了一种基于快速傅里叶变换的扫描单发单收面阵近场成像技术,该技术通过保留回波模型中的幅度衰减因子,并根据目标回波方程特性对...     

大功率IGBT器件及其组合多时间尺度动力学表征研究综述

在提出电力电子器件及其组合多时间尺度动力学表征需求的前提下,以目前常用的全控型电力电子器件——绝缘栅双极晶体管(Insulated Gate Bipolar Transistor,IGBT)为例,系统分析并归纳了目前在IGBT及其组合多时间尺度动力学表征研究方面的进展和成果,包括作为基础的大功率IGBT及其组合多时间尺度电热瞬态建模方法、基于模型的大功率IGBT模块失效量化表征方法以及用于辅助分析的IGBT组合多速率仿真方法。此外,介绍了基于IGBT多时间尺度模型的装置应用设计案例。从建模方法、可靠性评估、仿真手段以及应用设计四个方面系统全面地阐述了大功率IGBT及其组合多时间尺度的动力学表征方法,可为电力电子混杂系统的精确设计提供电力电子器件层面的理论和技术支撑。     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

Fuzzy recognition of missile borne multi-line array infrared detection based on size calculating

In order to improve the infrared detection and discrimination ability of the smart munition to the dy-namic armor target under the complex background, the multi-line array infrared detection system is established based on the combination of the single unit infrared detector. The surface dimension features of ground armored targets are identified by size calculating solution algorithm. The signal response value and the value of size calculating are identified by the method of fuzzy recognition to make the fuzzy classification judgment for armored target. According to the characteristics of the target signal, a custom threshold de-noising function is proposed to solve the problem of signal preprocessing. The multi-line array infrared detection can complete the scanning detection in a large area in a short time with the characteristics of smart munition in the steady-state scanning stage. The method solves the disadvan-tages of wide scanning interval and low detection probability of single unit infrared detection. By reducing the scanning interval, the number of random rendezvous in the infrared feature area of the upper surface is increased, the accuracy of the size calculating is guaranteed. The experiments results show that in the fuzzy recognition method, the size calculating is introduced as the feature operator, which can improve the recognition ability of the ground armor target with different shape size.